Sorry, I could not read the content fromt this page.Sorry, I could not read the content fromt this page.
What to do if your keyboard on the screen. And if there are dozens of screens: At CES, the Russian design Art Lebedev, the company shows upcoming Optimus Aux Optimus popularis keyboard with a mini and a series of six unique keyboard for data input devices on the key to the home screen.
Showing posts with label Method. Show all posts
Showing posts with label Method. Show all posts
Saturday, November 9, 2013
Monday, August 26, 2013
Use the Three Bowl Method When Separating Egg Whites
If you don't have a dedicated yolk separator, separating eggs always runs the risk of a cracked yolk seeping into your egg whites. But if you use three bowls throughout the process, you'll never need to worry.Emma Christensen at The Kitchn, like many of us, used to use two bowls, cracking the egg into one, and scooping the yolk into another. A better solution is to pour the whites from each egg into a third bowl, and keep cracking eggs into the newly emptied one. That way, if a yolk cracks, it will only ruin one egg, instead of all the eggs you cracked before it. It does create a little more to clean up, but that's a small price to pay for perfect egg whites.This is the kind of tip that's obvious in hindsight, but worth keeping in the back of your mind whenever you need to separate eggs for a recipe.Why You Should Use 3 Bowls When Separating Eggs | The KitchnSaturday, August 10, 2013
Bending, Shaping and Strengthening Foam Armor (Cheap and Easy method)
*** If you enjoyed this instructable, please consider voting for me in the contests it is entered in! Thanks for reading! ***
Putting complex bends and curves in EVA Foam armor can be tricky, since the foam is very elastic and flexible. Parts don't always like to hold their shapes, and the prevalent method (from my experience reading costume forums like therpf) for shaping foam armor parts is to use a heat gun. I didn't have a heat gun, so I decided to apply something I discovered when I was making my Iron Man Mark 3: paperclips are surprisingly good at holding form and shape.
My method basically involves cutting lines into the inside of an armor piece, lining the cut with a paperclip and then sealing it back up with hot glue. The best part about this method is that you don't have to go out and buy a heat gun if you don't have one. Additionally, it is really easy to re-shape if you so desire, and the paperclips actually do strengthen and stiffen the parts.
The materials you will need:
1) Foam armor part (pepakura is the most popular method for making foam armor)
2) Paper clips (Use large ones because they are thicker and sturdier)
3) Hot Glue gun
4) Pliers (Needlenose, and optionally diagonal cutters as well)
5) X-acto knife
In this instructable, I will show a fairly simple method to form, shape and strengthen foam armor, using an Iron Man helmet made from EVA foam floor mats.
CAUTION: Be careful when placing cut paperclip bits as these are sharp and can easily penetrate skin. I have placed this warning again at the end of the Instructable, so please follow safety precautions and exercise good judgement while building!
Monday, June 3, 2013
Learn Anything in 20 Hours with This Four Step Method
Sorry, I could not read the content fromt this page.Sorry, I could not read the content fromt this page.
Subscribe to:
Posts (Atom)